Problems to be understood before buying a tie machine:
1. Please take a picture of the product to confirm whether the product is suitable for the binding machine
2. Confirm customer's requirements for bundled products: strapping tightness, strapping diameter, tail reservation, strapping position and other technical requirements (e.g. Realize positioning rod 2. Install sensor 3. Desktop hollowing, etc.). Only one machine can be used for a cable tie of one size. A large size can be tied with a small size, and a small size cannot be tied with a large size. The machine can not make the size of the tie universal
Cable tie compatible specifications:
Length of cable tie: 80mm-160mm
Cable tie width: 2.5mm to 5mm
Strapping range: 80mm (cable tie length) -12mm (maximum binding capacity), 100mm (cable tie length) -18mm (maximum binding capacity), 120mm (Cable tie length) -22mm (maximum binding capacity), 150mm (cable tie length) -30mm (maximum binding capacity)
3. Can the cable ties used by the customer be fed?
Machine cable tie requirements: (1) the body of the cable tie should be straight; ② There is no burr on the tie head.